|
1.
Load capacity : 2000kgf
2.
Driving method : 400W AC servo motor/ servo driver via reducing
motor, transmit by high precision ball screws.
3.
Resolution : 1/20,000
4.
Accuracy : ±0.5%
5.
Test speed range :
0~1000mm/min
6.
Spacing of crosshead for
mounting grip: Max. 900mm (exclude the grips)
7.
Crosshead speed and
permitted force : Full speed in rated capacity
8.
Effective test width:
400mm
9.
Indicator
: Computer display.
10. Load cell : High precision. Japan N.T.S made
or equivalent made in America
11. Units of system selectable :
a) Force : kN, kg, lb, g, N, ton
b)
Elongation: mm, cm, inch
12. Dimension: approx. 900x600x1500mm (W) x (D) x (H)mm
13. Weight approx: 200 kg
14. Power requirements: 3ψ,220V/60HZ, or selected
by customers.
15. Features:
Safety protection –
Automatic detection of specimen breakdown point to protect the
computer system and prevent load cell. It can be set in different safety
capacity.
Speed - Adopt PLC automatic speed control device. Available in automatic and
manual
speed control.
Base – the machine is
made of steel plant with hardened surface treatment. High stren-
gth, resistance of shakes.
Flexible Sample Testing –
Specimens may be in rod, flat or form…etc.
Enable testing
of various materials.
High Precision –
Forces are measured with a precision within ±0.5%
of indicated val-
ues. Adopt high accuracy
and precision load cell to ensure test stabilities and low error.
Conforms to national standard – Meets ISO, ASTM, DIN, EN, GB, BS, JIS, CNS, UL..
.etc standard
requirement.
16. Comprehensive dedicated software for every application (Windows
98//2000/XP):
Main Memory -
Standard 256MB RAM DDR-266.
Able to extend to 2.0GB
184PIN SIMM SOCKET DIMMx3
Storage Medium -
Adopt MAXTOR, IBM, SEAGATE...etc brand of hard disk
Upto 60GB.
Monitor: 17" LED display high revolution
Floppy Disk:
Standard 1.44MB FDD*1.
Adopt TEAC, PANASONIC, MITSUMI...etc brand.
CD-ROM: Above 52 X high speed CD-ROM
Printer: advance color printer
17. Control mode: constant speed stroke, constant speed rate, constant
load control, con-stant displacement control.
18. Functions:
Yield Point & Yield Strength
Percent Elongation
Break Modulus
Ultimate Value
0.2% Offset Yield & Yield
Break Value
Compare Diagrams
Standard Deviation
Energy
Stress
Average Value
X -Y Diagrams
X –T Diagrams
Deformation 1 (Load - Elongation)
Deformation 2 (Elongation - Load)
Note: Specifications are subject to change without notice.
|
